Rheintacho 5823.200 Speed Monitor

Rheintacho 5823.200 Speed Monitor
Rheintacho Messtechnik Gmbh
Speed Monitor
5823.200
Mode: Rpm
Analog Output 20ma
Sensor Supply/start Up Delay: +12v
Supply: (+) 24vdc
Made In Germany
Weight : 180 Gm
Ref No : 69179

What is the Rheintacho 5823.200 Speed Monitor?

The Rheintacho 5823.200 is mainly a speed monitoring device that is used primarily in the monitoring of rotational speed limits where the speed of a machine or process should not exceed the set limits. The key benefit of this device is its ability to monitor that the machines always run within the given limits of speed without causing damage, enhancing efficiency, shortening downtime, and safely.

This specific model from the wide range of speed monitoring devices available from Rheintacho is known for its ruggedness, flexibility, and ease of use. This device has its practical application designed to set speed control with measurement in a vast number of mechanical systems such as motors, turbines, conveyor belts and pumps. The high reliability and accuracy of the device make it highly necessary in manufacturing, transport, and processing industries.

Key Features and Specifications

The Rheintacho 5823.200 Speed Monitor also boasts several features and characteristics concerning its counterparts. Some of the major specifications and benefits are as follows:

Wide Measuring Range: The device’s range is wide, applying it to so many industrial applications, with its ability to measure from low to extremely high rotational speed. This is an assurance that it meets the requirements of not only small but also large machines.

High accuracy: One of the striking features of this particular monitor is that it’s been designed to deliver highly accurate measurements, with minimum risks of error in operational terms or mechanical malfunctions. This is primarily because in some industries, the slightest deviation in speeds can result in serious financial loss or pose a safety risk.

Durability and Reliability: This device, Rheintacho 5823.200, is shock-resistant and vibration-resistant as well with a robust body, hence it’s quite a challenge to withstand such extreme conditions of industrial environment where the conditions are related to temperature variation, dust, humidity, etc. This way, the appliance would always come up with optimum performance levels in the harshest of the industrial conditions.

Compact Design: The Rheintacho 5823.200 is compact, though very powerful, which allows it to be mounted at virtually any location. Its compact footprint means that there is an opportunity for the mounting into new systems as well as into existing ones without occupant much space.

Easy-to-use interface: the device was designed with considerations for user friendliness. Therefore, the user interface is intuitive in setting up and adjusting parameters when needed. This device also boasts a digital display that gives real-time speed readings of monitored equipment, which can easily diagnose and intervene when necessary.

Safety Features: The device has given much needed in-built safety mechanisms to guard machinery but personnel as well. By monitoring speed and determining that the speed has moved beyond limits set for the equipment, alarms are sounded or shutdown equipment that can prevent accidents and damage.

Versatile Applications: Apart from just one industrial field, it is also plausible that the Rheintacho 5823.200 be used in other industries and application. It can generally be applied in manufacturing automotive, material handling and packaging, among others, where speed monitoring is a crucial point for maintaining product quality and safety, even in food processing.

How does the Rheintacho 5823.200 work?

The Rheintacho 5823.200 functionality will depend on its ability to perceive and measure the rotational speed of moving parts. This can be achieved through sensors combined with electronic circuits. Here’s a rough outline of how it generally works:

Speed Detection: the monitor detects rotational speed of a moving component, such as motor or conveyor belt, provided with magnetic, optical, or inductive sensors to match the application requirements.

Signal Processing: Once the sensor captures the speed data, it transmits the information to the internal circuitry of the device. The Rheintacho 5823.200 processes the signals comparing the actual speed with the set speed limits pre-programmed in the system.

Output Control: If the speed reads within the acceptable range, the device would go on with normal operation. However, if the speed goes beyond or below the limits set, the device may send alarm messages or send a signal to shut down equipment for the safety of the system.

Feedback Loop: Thanks to the real-time produced by the monitor, an operator can make all the necessary adjustments manually or automatically according to the installation. This ensures that the system is running at optimal levels.

Applications of the Rheintacho 5823.200 Speed Monitor

The Rheintacho 5823.200 Speed Monitor can be used in almost all industries where there is a requirement to monitor speed within a specific setting to ensure safety and overall efficiency during its operation. Some of these include:

Manufacturing: On the production machinery, it is essential to maintain the machines at maximum speed for good productivity and output quality. It monitors the proper working condition of lines by not overloading or slowing them down unnecessarily.

Transportation: In a conveyor system, conveyor belts need to be closely monitored concerning speed so that jams, breakdowns, and injuries are minimized, especially on the products being carried. The Rheintacho 5823.200 would ensure smooth operations with correct speed levels.

Power Generation: Because the speed control in power generation turbines and motors must be such that it will run with continuous speeds for efficiency and minimizing overheating or mechanical stress, these exact real-time data ensure to perform those critical components.

Processing Plants: Industries like food, beverage, and pharmaceuticals need tight speed control in the processing machinery to ensure quality of the product. In this regard, the Rheintacho 5823.200 gives continuous speed monitoring.

Benefits of the use of the Rheintacho 5823.200 Speed Monitor

Prevention of Accidents and Damage to the Equipment: Ensuring that this machinery does not exceed their safe operating speed limit, this model ensures that accidents are prevented and the loss in equipment is avoided. It not only saves workers but also avoids high bills for the necessary repairs and time lost.

Increased Efficiency: Real-time monitoring enables instant identification and correction of potential issues related to speed, thereby averting the loss of time otherwise experienced and ensuring higher efficiency in the execution of machines and processes.

Lower Maintenance Costs: This is because proper monitoring and maintenance ensure that machinery is operated at appropriate speeds; this minimizes friction and abrasive wear on machinery, extending the life of parts and reducing the need for repairs or replacements.

Flexible Integration: Without much difficulty, the Rheintacho 5823.200 can be used to integrate into various new and existing systems, giving it a lot of versatility in application.