Oceaneering Parker Hannifin 100755-rk Spm Valve Repair Kit
Manf: Oceaneering International Inc
Parker Hannifin Corp
Part#: 100755-rk
Kit Repair Valve Spm Normally-closed 0.5 In 3k
Xref: X200284303
Mat# 449942
P/n: 0397545
O-ring 2-129 Buna-n 90 Duro N0552
P/n: 0408391
O-ring Buna-n 2-130-n0552-90 Duro
P#: 100749
Piston 0.5” Spm Valve
100746 Aa
Ht# 257031
P#: 100666-04
Nut Hex Nylon Lock 1/4-28 Unf-2b Asme B 18.16.6. Material Austenitic Stainless Steel Group 2 Condition Cw1
P/n: 100337-t0r216
T-seal Rod 1.13 Id Nitrile W/pfte Back-up Rings
P/n: 100337-t0p210
T-seal Piston 1.00” Od Nitrile W/pfte Back-up Rings
Mf: 4115t0p2100110
Pn: 100337-t0r205
T-seal Rod .44” Id Nitrile W/ofte Back-up Rings
Mf: 4115t0r2050110
Rev: A
Mfg Pn: Tr005 N4115 B011
Description: Rod Nitrile 75a
7/16 X 11/16
Generic: Nitrile
Hardness: 75a
P#: 100743
Seat Upper 0.5 In Spm Valve
P#: 100741
Seat, Lower 0.5 Inch Spm Valve Detail
P/n: 100740-sk-90
Kit Seal Valve Spm 0.5 In 3-5 Ksi, 90 Durometer O-rings
100747 Aa
Stem 0.5-in Spm Valve 3/5 Ksi Wp Detail
N00864
100873 B
P#: 100873
Tool, Installation, Spool, Spm, 0.5in Detail
P#: 100742
Cage 0.5 In. Spm Valve Detail
Rev E
G 19568
Pn: 100748
Spool Nc Vlv Spm 0.5” 3/5ksi Detail
Rev B
Ht G20127
100746
Rev Aa
Collet Split 0.5 In Spm Valve Detail
Made In The Us
Weight : 750 Gm
Condition : New 12 Kit
Ref No : 63997
What is the Oceaneering Parker Hannifin 100755-RK SPM Valve Repair Kit?
The Parker Hannifin 100755-RK SPM Valve Repair Kit is a specific collection of spare parts required to repair and replace Parker Hannifin’s SPM valves. The SPM valves are widely applied in hydraulic systems of oil and gas, marine engineering, and heavy machinery.
SPM stands for Surface Pressure Management valves are highly essential when it comes to controlling fluid pressure within a system. When those valves get worn out and start malfunctioning, you may experience leaks, reduced efficiency of systems, or even equipment breakdown. A repair kit, like the 100755-RK, is designed to fix these problems by giving you everything you would need to bring back the valve’s optimal performance.
Why might you need a valve repair kit?
Hydraulic fluid pressure is always applied in many instances, where the valves, being part of the hydraulic component, are subjected to degradation. Valves eventually degrade due to the following factors:
Constant operation at high pressure: This subjects the sealing surfaces and valve inner parts to mechanical stress and wear
Exposure to contaminants: Dust, dirt, and even water may penetrate into hydraulic fluids and damage them overtime.
General aging: Any system, no matter how well cared for, will eventually wear out its components.
It typically proves to be extremely expensive and time-consuming to replace an entire valve in the event it fails or wears out or otherwise no longer functions with a level of efficiency as desired. A repair kit such as 100755-RK could allow for quick, economical replacement of a valve by replacing only the worn parts.
Key Features of the 100755-RK SPM Valve Repair Kit
The 100755-RK kit is particularly designed for Parker Hannifin’s SPM valves. This would indicate that all parts will fit exactly and be of exactly the same quality as the manufacturer. Some items that form the most important parts of the kit include:
Seals and O-rings: They are highly critical to retaining the seal in the valve. Eventually, the seals may weaken and crack out; hence, their replacement is a must.
Valve seats and springs: Most of these deteriorate with time because of pressure and movement. The kit comes with new seats and springs that will make the valve work smoothly again.
Fasteners and screws: It is sometimes all about the little things. Worn or corroded screws cause improper alignment or sealing within the valve, which means that replacing them is often necessary.
Each of these parts contributes to repairing the valve back to full functionality and, above all, to make it perform at its best.
Benefits of Using Oceaneering Parker Hannifin 100755-RK SPM Valve Repair Kit
There are numerous advantages in replacing the valve when using a repair kit instead of the entire valve. These include:
Cost saving: A repair kit is much cheaper than buying a completely new valve. While being able to have some technical expertise which enables a valve to be repaired you avoid the higher cost of new equipment.
Increased equipment life: Worn-out parts can extend the life of hydraulic systems by replacement. Maintenance through a repair kit prevents small problems from becoming big-time problems.
Reduced down time: It is usually quicker to repair a valve rather than to replace it. Your machinery will spend less time idle and, in fact, this is one factor which truly rings very true in sectors where stopping for a minute will cost you.
OEM quality: The 100755-RK is manufactured specifically for Parker Hannifin valves; you can expect to get parts that will meet the exact OEM specifications. This means that you are confident that these parts will fit and perform precisely like the new valve.
How to Use the 100755-RK Valve Repair Kit
A valve can be fixed with a basic repair kit if equipped with an understanding of hydraulic systems and some mechanical ability. Here is the general step-by-step for you:
Shut down the system: So, do not start while the hydraulic system is on. Depressurize it before you begin your work.
Disassembly of the valve: Once you understand the steps for the valve manufacturers for disassembling the valve, be sure to take note of all those things that you remove.
Check for visible signs of wear or damage on parts: look for cracks in seals, worn valve seat, and corroded screws.
Change worn-out parts: Replace the old or damaged parts with the ones found in the 100755-RK kit. Fit them properly to avoid sealing and alignment issues
Assemble the valve: Assemble the valve in a careful manner ensuring that all its parts are in place.
Test the system: Now that you have reassembled your valve, switch the system back on and inspect it for any leaks or performance issues. If everything appears to be working fine, then all is well, and your repair was a success.
