Important Notice: In celebration of Diwali, our operations will be impacted from October 31st to November 3rd. We appreciate your patience during this period and will resume normal services on November 4th. Wishing you a joyful Diwali!

Manitowoc 83-7603-3 Water Valve Kit

Availability: 1 in stock

Brand

Condition

New with original Box

Country of Manufacturer

DENMARK

Qty Type

KIT

Weight

600 GRAMS

SKU 75352 Category Tags ,
Manufacturer Manitowoc Beverage Equipment Inc.
Model E2
Voltage 24V AC / 12V DC
Model No 202-FN-1101
Union Male Connector 1/8 NPT to 1/4 OD Tube (Part: 13-6096-1)
Connector Part: 83-6127-9
Cap Access Fitting Part: 83-7308-3
Female Wing Adapter Part: 87-0609-3
Label Water Part: 81-3105-3
Two Hand Water Trigger Part: 83-7603-3
Trigger Water Valve Cover Part: 83-7602-3
Trigger Water Valve Assembly Part: 13-7601-9 (Includes Two-hand Operational Lever, 8376033)
Water Adapter 3/8 NPT x 1/8 NPT (Part: 558.02.01.066)
Nylon Insert Part: 6002421
Female Connector 1/4 Female Flare x 1/4 OD Tube (Part: 442031)
Screw #10-24 x 1/2 TC (Part: 8361273)
Screw #8-32 x 1/2 (Part: 5205063)
Hex Nut #8-32 (Part: 5026241)
Lock Washer (Part: 5429061)
Label – Inlet Water (Part: 5573163)
Operating Pressure 21 Bar AC, 10W; 18 Bar DC, 20W; PB 35 Bar; MWP 500 PSIG
Weight 600 gm
Reference No 75352
Made In Denmark

What is the Manitowoc 83-7308-3 Water Valve Kit?

The Manitowoc 83-7308-3 Water Valve Kit is one of the essential components of the Model E2 ice machine. It manages the provision of water in the machine and controls the water level and flow. There will be efficient ice production without proper management of water; hence, this kit has to be present to ensure it performs with high efficiency and completes the desired functions by the ice machine. It would operate on a 24 Vac power source.

Key Features of the Manitowoc 83-7308-3 Water Valve Kit

Water flow control: Always under a controlled water supply, it enhances the ice-making system’s efficiency.

Rigorous build: Made from durable material, this kit is strong and reliable, and thus can perform well in the worst conditions used for commercial ice machines.

Low-energy kit: This kit is rated at 24 Vac and ensures reduced energy usage while increasing performance.

Easy Installation: The kit is user-friendly, which allows for very straightforward installation and replacement of the Manitowoc Model E2 ice machine.

Benefits When Using the 83-7308-3 Water Valve Kit

Ice Production: Consistent water flow results in the production of the required quantity and quality of ice. This ensures that the process runs smoothly.

No Water Leaks: Water regulation is proper and eliminates potential leaks, thereby preventing huge losses in terms of downtime and repair costs.

Extends Machine Life: Generally, continued use of the 83-7308-3 Water Valve Kit minimizes wear and tear on the machine and supports an extension of the product’s overall lifetime.

Saves Cost: This is primarily through the efficient and reliable operation of the valve, thus meaning less maintenance requirement and a good value investment for ice machine owners.

How to Replace the Manitowoc 83-7308-3 Water Valve Kit

Replacing the 83-7308-3 Water Valve Kit for your Manitowoc is very easy. It only requires several steps.

Disconnect the power: This is to get rid of electrical risks and one way of doing this would be disconnecting the power supply to the ice machine.

Access the valve compartment: Often, the access to the water valve compartment lies at the back or behind the water valve of the ice machine.

Remove the old valve: Unscrew using your screwdriver the previously installed valve. Then, remove the water lines that are attached to the old valve.

Install new water valve : Install a new water valve with a tight fit. Connect all water lines and torque the screws

Test the machine : The power will be turned back on and tested to see if the valve is working properly with no leaks.

Reasons for using Manitowoc 83-7308-3 Water Valve Kit:

Manitowoc as a market leader is synonymous with reliability and efficiency in ice machine parts. The 83-7308-3 Water Valve Kit is constructed to be high in performance, rugged and cost-effective for owners of commercial ice machines. You will be investing in the sustained efficiency and reliability of your Manitowoc Model E2 ice machine.

Brand

Condition

New with original Box

Country of Manufacturer

DENMARK

Qty Type

KIT

Weight

600 GRAMS

Reviews

There are no reviews yet.

Be the first to review “Manitowoc 83-7603-3 Water Valve Kit”

Your email address will not be published. Required fields are marked *

Enquiry for:

Manitowoc 83-7603-3 Water Valve Kit

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.