| Attribute | Value |
|---|---|
| Product | C&K Systems ST802 Control Alarm Panel |
| Manufacturer | Tata Honeywell |
| Model Number | T010012538 |
| Category | Total Security Solutions |
| Brand | C&K Systems |
| Model | ST802 |
| Approximate Weight | 1.5 kg |
What is the C&K Systems ST802?
The C&K ST802 is a hardwired alarm control panel that offers residential and commercial property security monitoring. It has the capability to handle multiple zones, so it is ideal for both small and large installations. Although the ST802 is not being manufactured anymore, it is still being utilized because it is dependable and has a good performance.
Some of its most notable features are:
✔️ Multiple Zones – Enables users to monitor various parts of a property.
✔️ Wired System – Provides a reliable and tamper-resistant connection.
✔️ User-Friendly Keypad – Easy-to-use interface for arming and disarming the system.
✔️ Backup Battery Support – Maintains the system’s functionality in case of power outages.
✔️ Expandable Design – Can be expanded to support more sensors and zones.
Programming the C&K ST802
Once installed, the ST802 requires programming to match your security needs. Follow these steps:
1. Enter Programming Mode
- Use the master code to enter programming mode.
- The default master code (if not changed) is usually provided in the user manual.
2. Assign Zones & Sensors
- Each sensor needs to be assigned to a zone number. This helps differentiate between entry doors, windows, and motion detectors.
3. Set Entry/Exit Delays
- Adjust the delay time for entry and exit before the alarm activates. This eliminates false alarms while arming/disarming.
4. Alarm System Testing
- Perform a full system test to ensure all zones, sirens, and notifications work correctly.
Troubleshooting Common Issues
Although the ST802 is solid, users may find some issues as follows:
🚨Issue: Alarm Panel Will Not Power On
✅ Solution: Ensure power supply is securely connected and check that backup battery is charged.
🚨Issue: False Alarms
✅ Solution: Check sensors for loose wires or misalignment, and confirm pets or environmental conditions are not causing motion detectors to go off.
🚨 Issue: Keypad Not Responding
✅ Solution: Attempt to reset the system by unplugging and replugging the power.
🚨Issue: Alarm Not Arming
✅ Solution: Make sure all doors/windows are closed correctly and no malfunctioning sensor is blocking activation.
